Installing and Connecting the TV

Connecting a Digital Satellite Receiver

Disconnect all power sources before making any connections.

1 Using a component video cable, connect the Digital Satellite Receiver’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections.

Note

This TV supports only the 480i and 480p signal format. If the TV receives a signal other than 480i or 480p, “Non Supported Video Format” appears on the screen.

2 Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO OUT jacks to the TV’s AUDIO IN jacks.

Note

The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound.

Rear of TV

Y

PB

PR

AUDIO-L

Digital Satellite

Component

 

Receiver

 

 

(white)

(e.g. SAT-HD200,

video cable

AUDIO-R

SAT-HD300, etc)

(not supplied)

(red)

 

 

 

 

 

 

VIDEO OUT

COMPONENT OUT

 

 

 

 

(1080i/720p/480p/480i)

AUDIO cable (not supplied)

 

1

2

 

DIGITAL

 

 

Y

AUDIO

S VIDEO

 

 

OUT

OUT

 

 

 

 

 

 

 

L2

Pb

OPTICAL

 

R2

Pr

 

 

AUDIO OUT

18