Optional Connections

Using Optional Equipment

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the or socket using a scart lead. If you do not have a scart lead, use the “Manually Tuning the TV” section of this instruction manual to tune in the VCR signal to TV programme number “0”.

If your video supports Smartlink please refer the "Smartlink" section of this instruction manual.

Connecting to External Audio Equipment

1To listen to the audio of your projection TV on the Hi-Fi equipment:

Plug in your Hi-Fi equipment to the B sockets on the rear of the projection TV if you wish to amplify the audio output from the TV.

The output level from B sockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound” section of this instruction manual to adjust the volume of the headphones.

2To listen to the Hi-Fi equipment on the projection TV speakers:

Plug in your Hi-Fi equipment to the A socket on the rear of the projection TV if you wish to listen to the audio

output from your Hi-Fi on the projection TV speaker. If you have a Dolby amplifier, connect the centre output from your amplifier to the A socket to use the projection TV as a centre speaker. Refer to the “Adjusting the Sound” section of this instruction manual and set the option “Speaker” to “Centre in”.

For mono equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 2 input signal using the instructions on this page below. Finally, refer to the “Adjusting the sound” section of this manual and select “A” on the sound menu screen.

Select and View the Input Signal

VIDEO TV

1 2 3

4 5 6

7 8 9

0

PROGR

MENU

RM 892

1

2

3

4

Connect your equipment to the designated projection TV socket, as it is indicated on the previous page.

Press the button repeatedly on your remote control until the correct input symbol appears on the screen.

Symbol

Input signals

k• Audio/video input signal through the Euro AV connector

• RGB input signal through the Euro AV connector

K• Audio/Video input signal through the Euro AV connector or the phono sockets H and .

q2

•

Audio/S Video input signal through the Euro AV connector

 

or the

 

 

sockets H and F.

K3

•

Audio/Video input signal through the Euro AV connector

 

 

 

Switch on the connected equipment.

To return to the normal TV picture, press the button on the remote control.

S

Optional Connections 27