Optional Connections
Selecting the output source for the Euro AV connectors
Using this function you can record on your VCR any signal coming from an external equipment connected to the Euro AV connectors :2/q2 or :3 placed on the rear of the projection TV.
In that case you have to select the output source as described below (if your VCR support Smartlink, this procedure is not necessary).
VIDEO TV
1 2 3
4 5 6
7 8 9
0
PROGR
MENU
RM 892
S
1 Press the MENU button on the remote control to display the menu on the screen.
2 Push the joystick to $to select the 
symbol, then push to z button to enter to the VIDEO CONNECTION menu screen.
3 Push the joystick to $or 4button to highlight:
TV Screen (input source for the TV screen) or
Output (output source available for :2/q2 and :3 Euro AV connectors).
Push the joystick to zto confirm.
4 Push the joystick to Zor zrepeteadly to select the desired source:
TV Screen TV, AV1, RGB, AV2, YC2 or AV3
Output TV, AV1, AV2, YC2, AV3 or AUTO
Then press the OK button to confirm.
If you select "AUTO", the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder, please remember to change back the Output to "TV" for correct unscrambling.
5 Press the MENU button to exit and return to the normal TV screen.
The selected signal is available for your optional equipment connected to the appropriate Euro AV connector.
PICTURE CONTROL
Picture Mode | Personal | |
Contrast |
|
|
Reset |
|
|
Format | Wide | |
VIDEO CONNECTION
TV Screen | [TV - - - - - - | |||||
Output | [AV1 - - - - - - | |||||
|
|
|
|
|
| |
TV |
| AV1 | ||||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional Connections 29