Additional Information

Troubleshooting

Here are some simple solutions to the problems which may affect the picture and sound.

Problem

Solution

 

No picture (screen is dark), no sound

Plug the projection TV in.

 

 

Press the button on the front of the projection TV.

 

If the indicator is on, press TV

button or a

programme number button on the remote control.

• Check the aerial connection.

• Check that the selected video source is on.

• Turn the projection TV off for 3 or 4 seconds and then turn it on again using thebutton on the front of the projection TV.

Poor or no picture (screen is dark), but good sound

Using the MENU system, select the Picture Adjustment display.

Adjust the brightness, picture and colour balance levels.

From the Picture Adjustment display select Reset to return to the factory settings.

Poor picture quality when watching a

Press the

 

button repeatedly on the remote control until

 

RGB video source.

 

the RGB symbol

 

is displayed on the screen.

 

 

 

 

 

 

 

Good picture, no sound

Press the

 

+/– button on the remote control.

If is displayed on the screen, press the button on the remote control.

Check that "Main" speaker is selected on the SOUND CONTROL menu.

No colour on colour programmes

• Using the MENU system, select the Picture Adjustment

 

display. Adjust the colour balance.

 

• From the Picture Adjustment display select Reset to return

 

to the factory settings.

 

 

Distorted picture when changing

• Turn off any equipment connected to the 21 pin Euro

programmes or selecting teletext

connector on the rear of the TV.

 

 

Noisy picture when viewing TV channel

Adjust Fine Tuning (AFT) to obtain better picture reception. For details, please refer to the section "Using the Further Programme Preset function"

Remote control does not function

Replace the batteries.

 

 

 

The standby indicator on the TV

Contact your nearest Sony service centre.

flashes.

 

 

 

 

 

If you continue to have these problems, have your TV serviced by qualified personnel.

NEVER open the casing yourself.

34 Additional Information