Sony KP-6lHS20 manual Also, set Cable to on in the Channel menu. seepage, Cable Box Only

Installing and Connecting the Projection TV

EiiSetting the Channel Fix feature in the Channel menu (see “Using the Channel Menu” on page

52)ensures that you do not accidentally switch the channels using your projection TV.

Cable Box Only

Use this hookup if:

0You subscribe to a cable TV system that uses scrambled or encoded signals requiring a cable box to view all channels, and

0You do not intend to hook up any other audio or video equipment to your projection TV.

When all channels are routed through your cable box, only one unscrambled channel is sent to the projection TV, so you cannot use the Twin View feature. If some channels are scrambled, but others are not, consider using the hookup on page 17 instead.

1 Connect the coaxial connector from your cable service to the cable box’s IN jack.

2 Using a coaxial cable, connect the cable box’s OUT jack to the TV’s VHF/UHF jack.

CableVHF/UHF

Rear of projection TV

Cable box

Also, set Cable to ON in the Channel menu. (seepage 52)

18