Sony KP-6lHS20 manual Other Information, Control unit, To program video equipment, Tips

Other Information

To program video equipment

1 Open the panel of the remote control.

2Move the slide switch to the desired component type.

3PressCODE SET inside the panel.

4Close the panel and enter the three-digit manufacturer’s code number using the O-9buttons.

5Press ENTER.

6To check if the code number works, aim the projection TV’s remote control at the component, open the panel, and press the green POWER button. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer.

-4

-5

- FREEZE -

-n

Tips

oIf more than one code number is listed, try entering them one by one until you come to the correct code for your component.

0If you enter a new code number, the code number you previously entered at that setting is erased.

0In some rare cases,you may not be able to operate your component with the Sony remote control. In this case,use the component’s own remote

control unit. i,

66