Sony KP 61V75, KP-48V75, KP-53V75, KP-53V75C, KP-61V75 operating instructions CR red CB blue Green

Connecting a DVD player with component video output connectors

Component video terminals Y/CB/CR provide a sharper, higher resolution picture by reducing the amount of signal processing thus creating a more accurate reproduction of the source.

If your DVD player has component video output connectors, connect them to VIDEO 4 IN on the projection TV in the following way.

CR (red)
CB (blue)
Y (green)
	Y
S-LINK
	CB
	VIDEO3
Rear of projection TV	CR
	VIDEO4
	L
	TV OUT

VMC-10HG (not supplied)

Component video outputs

	R
	AUDIO
CONTROL S	VIDEO 4
OUT	IN

AUDIO-R (red)

AUDIO-L (white)

LINE OUT		S VIDEO OUT	COMPONENT VIDEO	S-LINK	DIGITAL OUT
R - A U D I O 1 - L	VIDEO				OPTICAL	COAXIAL
			DVD

Audio outputs

RK-74A

(not supplied)

Notes

•Connect your DVD player directly to your TV. Connecting the DVD player through other video equipment will cause unwanted picture noise.

•When the DVD player is connected using VIDEO 4 IN, its MONITOR OUT signals cannot be output.

•Some DVD player connectors may be labeled Y, B-Y, and R-Y. In this case, connect Y (green) on the projection TV to Y on the DVD player, CB (blue) to B-Y, and CR (red) to R-Y.

•The jacks of this projection TV are colored in green (Y), blue

(CB), and red (CR). If line output connectors of your DVD player have different colors, make connections according to their labels.

•Because the high quality pictures on a DVD disc contain a lot of information, picture noise may appear. In this case, reduce the SHARPNESS level in the VIDEO menu (see SHARPNESS on page 31).

•If the incorrect colors appear when using this component video input, recheck the connections they may be reversed.

14-EN Getting Started