Sony KP 61V75, KP-48V75, KP-53V75, KP-53V75C, KP-61V75 Setting cable TV on or off

4 Press Vor vto move the cursor (z) to the symbol showing the line you want to adjust, and press .

CONVERGENCE

+RED +BLUE MENU

Us e RETURN E x i t MENU

+RED : Red vertical and horizontal line (left/right/up/ down adjustment)

+BLUE :Blue vertical and horizontal line (left/right/up/ down adjustment)

5 Press V, B, v, or bto move the line until it converges with the center green line, and press .

R
	CONVERGENCE
G
	+RED
B	+BLUE
	MENU
B	Us e
			E x i t MENU
		RETURN

G+R

To move	Press
Up	V
Down	v
Right	b
Left	B

6 Repeat steps 4 and 5 to adjust the other lines until all three lines converge and are seen as a white cross.

7 Press MENU to return to the original screen.

Setting cable TV on or off

If you have connected the projection TV to a cable TV system, set CABLE to ON (the factory setting). If not, set CABLE to OFF.

You do not have to do this procedure if you perform AUTO SET UP (page 21). Do this procedure only when you want to set it manually.

1	Press MENU.
2	Press Vor vto select , and press			.
3	Set CABLE to ON or OFF:
	(1) Press Vor vto move the cursor (z) to CABLE,
	and press	.
	(2) Press Vor vto select ON or OFF, and press				.
			SET UP
			CHANNEL ERASE/ADD
			CHANNEL CAPTION
			CHANNEL BLOCK
			FAVORITE CHANNEL
			CABLE : OFF
			AUTO PROGRAM
			VIDEO LABEL
		CC	LANGUAGE : ENGLISH
			CONVERGENCE
		Use	MENU	Exit MENU
4	Press MENU to return to the original screen.

Note

•If CABLE appears in gray, the projection TV is set to a video input and you cannot select CABLE. Press ANT so that a channel number appears.

24-EN Getting Started