Sony KP 65WS500, KP-57WS500 manual Connecting a DVD Player with Component Video Connectors

Installing and Connecting the Projection TV

Connecting a DVD Player with Component

Video Connectors

This is the preferred hookup to use if:

❑Your DVD player has component (Y, B-Y, R-Y) jacks.

Disconnect all power sources before making any connections.

1 Using three separate component video cables, connect the DVD player’s Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the projection TV. Use the VIDEO IN 5 or 6 connections.

✍The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled Y, CB and CR, or Y, PB and PR. If so, connect the cables to like colors.

2 Using an audio cable, connect the DVD player’s Audio OUT jacks to the projection TV’s AUDIO IN jacks. Be sure to use the same row of inputs that you used for the video connection (VIDEO IN 5 or 6).

Rear of projection TV

	PR
VMC-10HG (not supplied)	PB
	Y
DVD player

AUDIO-R (red)

AUDIO-L (white)

RK-74A (not supplied)

26