Installing and Connecting the Projection TV

Connecting an AV Receiver

For greater control of all audio and video equipment, connect an AV receiver.

Change “Video Label” for the VIDEO 1 input to “Receiver” (see page 59).

Disconnect all power sources before making any connections.

1 Connect the coaxial cable from the incoming cable connection or antenna to IN on the VCR.

2 Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the projection TV.

3 Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the projection TV to MONITOR OUT on the AV receiver.

4 Using an AUDIO/VIDEO cable, connect TV OUT on the projection TV to AUDIO/VIDEO 2 IN on the AV receiver.

5 Using an AUDIO/VIDEO cable, connect the video equipment to the AV receiver.

6 Select the Setup menu and set “Video Label” to “Receiver” to fix your TV’s input to AV receiver (see “Video Label” on page 59).

Coaxial cable (not supplied)

VMC-810S/820S

(not supplied)

Rear of projection TV

 

VCR

VIDEO

AUDIO-L

VIDEO

 

AUDIO-R

 

Cable/ Antenna

VMC-810S/820S (not supplied)

VMC-810S/820S (not supplied)

 

AUDIO/

AUDIO/

VIDEO 2 IN

 

VIDEO 1 IN

VMC-10HG (not supplied)

MONITOR

OUT

AV receiver

AUDIO/VIDEO 1 OUT

 

30

Page 30
Image 30
Sony KP 65WS500, KP-57WS500 manual Connecting an AV Receiver, Change Video Label for the Video 1 input to Receiver see