EJECTPOWER

MUTING DISPLAY

TV

INPUT

 

 

 

SELECT

 

 

SLEEP

TIMER ON SCREEN

 

MENU

 

RESET

 

SELECT

VCR Plus

1

2

3

 

COUNTER/

4

5

6

 

 

 

REMAIN

7

8

9

COUNTER

JUMP

 

ENTER

RESET

 

 

 

 

0

VOL CH

INDEX

TAPE SPEED

REC &SLOW 7

X2PAUSE

SEARCH

REW PLAY FF

STOP

10Press SELECT.

The message “Please turn TV off to set timer” is displayed for three seconds. Then the TIMER SET/CHECK menu reappears and the cursor (z) is displayed at the left margin.

11When you want to set other programs, press – ￿to move the cursor (z) to the next line, then repeat steps 2 through 10.

12Press MENU to exit the TIMER SET/CHECK menu.

13Press POWER to turn off the Video/TV.

The TIMER REC lamp on the front of the Video/TV lights up and the Video/TV enters recording standby mode.

The Video/TV turns on automatically and starts recording at the preset start time, and the TIMER REC lamp on the front of the Video/TV lights up.

Daily/weekly recording

You can preset your Video/TV to record the same program every day of the week (daily recording) or the same program on the same day every week (weekly recording). Press – ￿in step 3 until the desired setting appears in the “DATE” position. With each press, the setting changes as follows:

4 (today) nSUN-SAT nMON–FRI nEVERY SAT n EVERY FRI n EVERY THU nEVERY WED nEVERY TUE nEVERY MON n EVERY SUN n3 (next month) n2......

When preset timer recordings overlap

•If the turn-on time of two programs are the same, the program listed first in the menu has priority.

•If the recording start time of the second program comes before recording of the first program is over, the second program starts recording only after the first program has finished.

To cancel timer recording

1Press POWER to turn on the Video/TV.

2Press TIMER ON SCREEN.

3Using + ￿or – ￿, select the timer setting which you want to stop recording and press RESET.

Using the Video/TV before timer recording starts

To use the Video/TV before timer recording begins, just press POWER. The TIMER REC lamp turns off and the Video/TV switches on.

32 Basic Operations