Operating Instructions
Connecting Additional Equipment
Connecting a TV and VCR
2
1 | VCR |
| |
From |
|
cable/antenna |
|
Rear of TV
1 | 3 | 4 | 5 | AUDIO OUT |
|
|
|
| (VAR/FIX) |
|
|
| Y |
|
| S VIDEO |
|
|
|
|
|
| P B |
|
|
|
| P R |
|
| VIDEO |
|
|
|
| L |
|
| L |
| (MONO) |
|
| (MONO) |
| R |
|
| R |
Video (yellow)
Audio L (white)
Audio R (red)
Optional connection
1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
Optional connection
❏If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
❏For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
Using your TV with this connection
This connection allows you to do the following:
❏Program your Sony remote control to operate your VCR (see page 5).
❏To activate your remote, press 
to operate your VCR. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31).
❏Press 
repeatedly to switch between VCR input (VIDEO input) and VHF/UHF (local channels).
14
