Jack

Description

1 DVI-HDTV

Can accommodate a copy-protected digital connection (HDCP*) to other devices

VIDEO

(such as digital set-top boxes) that have compatible interfaces. The DVI-HDTV

AUDIO R/L

input terminal is compliant with the EIA-861 standard and is not intended for use

(VIDEO 7 IN)

with personal computers. See the instruction manual that came with your

 

equipment for details about connecting and using it with the TV.

 

 

2 S VIDEO IN 1/3

Connects to the S VIDEO OUT jack of your VCR or other video equipment that has

 

S VIDEO. S VIDEO provides better picture quality than either composite video (3)

 

or VHF/UHF (9) connections.

 

 

3 VIDEO IN 1/3/4

Connect to the composite A/V output jacks on your VCR or other video

VIDEO/L(MONO)

component. A fourth component A/V input jack (VIDEO 2) is located on the front

-AUDIO-R

panel of the TV. This video connection provides better picture quality than the

 

VHF/UHF (9) connection.

 

 

4 MONITOR OUT

Lets you record the program you are watching to a VCR. When two VCRs are

 

connected, you can use the TV as a monitor for tape-to-tape editing (not available

 

with 480p, 720p, or 1080i when the input is set to VIDEO 5-7).

5AUDIO OUT (VAR/FIX) Connects to the left and right audio input jacks of your audio or video equipment.

L (MONO)/R

You can use these outputs to listen to your TV’s audio through your stereo system.

6 HD/DVD IN 5/6

Connect to your DVD player ’s or digital set-top box’s component video (Y, PB, PR)

(1080i/720p/480p/480i)

and audio (L/R) jacks. Component video provides the best picture quality (better

 

than 2, 3, or 9).

 

 

7 AUX

Auxiliary RF input that connects to your antenna, CATV cable, or cable box output

 

jack. This is convenient if you are using two VHF/UHF sources (antenna, CATV

 

cable, or cable box). For details, see pages 16 to 19.

 

 

8 TO CONVERTER

Connects to your cable box input jack. This VHF/UHF output jack lets you set up

 

your TV to switch between scrambled channels (coming through a cable box) and

 

unscrambled cable channels. Use this jack instead of a splitter to get better picture

 

quality when you need to switch between scrambled and unscrambled cable

 

channels. For details, see pages 18 to 19.

 

 

9 VHF/UHF

Primary RF input that connects to your VHF/UHF antenna or cable.

 

 

0 CONTROL S

Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony

IN/OUT

infrared-controlled audio or video equipment that has the CONTROL S function.

 

 

* High-bandwidth Digital Content Protection

Setup

SETUP

SETUP

SETUP

SETUP

13

Page 14
Image 14
Sony KV-32HS500 manual Video in 1/3/4, HD/DVD in 5/6