Other Information
Programming the Remote Control
3
2
HOME THEATER CONTROL
/CINEMOTI | ON |
DRC |
The remote control is preset to operate Sony brand video equipment.
Sony | Switch Position | Programmable |
Equipment | on Remote Control | Code Number |
|
|
|
Beta, ED Beta VCRs | AV1 | 303 |
|
|
|
8 mm VCR | AV2 | 302 |
|
|
|
VHS VCR | AV3 | 301 |
|
|
|
DVD Player | DVD | 751 |
|
|
|
If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedures to program the remote control.
✍The equipment must have infrared (IR) remote capability in order to be used with the remote control.
1Check the list of the “Manufacturer’s Codes” listed on page 52, and find the
2Open the cover of the remote control and move the slide switch to the desired equipment type.
3Press CODE SET and close the cover of the remote control.
✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
4Enter the
5
6To check if the code number works, aim the TV’s remote control at the equipment and press the green POWER button that
corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.
4
5
DRC/CI
NE
MOTION
50