Additional Information
TroubleshootingShould you encounter a problem with your system, do the following:
1Make sure the power cord and speaker cords are connected correctly and firmly.
2Find your problem in the troubleshooting checklist below and take the indicated corrective action.
If the problem persists after doing all of the above, consult your nearest Sony dealer.
Note that if service personnel changes some parts during repair, these parts may be retained.
When the "/1 indicator flashes
Immediately unplug the power cord and check the following items.
•If your unit have a voltage selector, is the voltage selector set to the correct voltage?
Check the voltage for your region, then make sure the voltage selector is set correctly.
•Are the + and – terminals of the speaker cords
•Are you using the supplied speakers?
•Is anything blocking the ventilation holes on the rear of the unit?
After checking the above items and fixing any problems, plug in the power cord again and turn on the system. If the "/1 indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.
General
The display starts flashing as soon as you plug in the power cord even though you have not turned on the system.
•The demonstration mode started. Press "/1 (page 16).
The clock or timer setting is canceled.
•The power cord is disconnected or a power failure occurred. Redo “Setting the clock” (page 18). If you have set the timer, redo “Setting the timer”
“– –:– –” appears in the display.
•The clock is not set. Set the clock (page 18).
•A power failure has occurred. Set the clock (page 18) and timer settings (page 43) again.
There is no sound.
•Turn MASTER VOLUME clockwise (or press VOLUME + repeatedly on the remote).
•The headphones are connected to the PHONES jack.
•Check the speaker connections (page 16).
•There is no audio output during Recording Timer.
There is no microphone sound.
•Turn MASTER VOLUME clockwise (or press VOLUME + repeatedly on the remote) or turn MIC LEVEL clockwise to adjust the microphone volume.
•Make sure the microphone is connected to the MIC jack correctly.
Continued l