Creating your own program
— Program Play
You can make a program of up to 25 steps from all the discs in the order you want them to be played back.
You can program all the tracks from a disc, all the MP3 audio tracks from a folder or a track as a step in the program list.
You can synchro record the programmed tracks onto a tape (page 34) or a USB device (page 24).
1 Press CD.
2 When playback is stopped, press PLAY MODE on the remote repeatedly until “PROGRAM” lights up in the display.
3 Press one of the DISC 1 ~ 3 buttons or DISC SKIP/
To program all the tracks on a disc at once:
Proceed to step 5 while “ALL” appears in the display.
To program all the MP3 audio tracks on a folder at once:
Press +/– repeatedly until the folder you want appears in the display, then proceed to step 5.
4 Press . or > repeatedly until the track number you want appears in the display.
The total playing time flashes in the display.
To program an MP3 audio track:
Press +/– repeatedly until the folder you want appears in the display, then press . or > repeatedly until the track number you want appears in the display.
Total playing time
Track (including selected number track)
5 Press ENTER.
The track(s) is(are) programmed.
The programmed step number appears in the display.
6 To program additional discs or tracks.
To program | Repeat steps |
Other discs | 3 and 5 |
|
|
Other tracks on | 4 and 5 |
the same disc |
|
|
|
Other tracks on | 3 to 5 |
other discs |
|
7 Press NX (or N on the remote).
Program Play starts.