Tuner
Listening to the radioYou can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset radio station
Use buttons on the remote for the operation.
1 Press TUNER/BAND repeatedly until “FM” or “AM” lights up in the display.
2 Press TUNING MODE repeatedly until “AUTO” lights up in the display.
3 Press +/–.
You can also use TUNING +/– on the unit.
The frequency changes as the system scans for a station.
Scanning stops automatically when a station is tuned in and “TUNED” lights up in the display. When a FM stereo program is tuned in, “STEREO” lights up in the display.
4 Press TUNER MEMORY.
A preset number flashes in the display. The stations are stored from preset number 1.
Preset number
5 Press +/– repeatedly to select the preset number you want.
You can also use TUNING +/– on the unit.
6 Press ENTER.
“Complete!” appears in the display. The station is stored.
7 Repeat steps 1 to 6 to store other stations.
You can preset up to 20 FM stations and 10 AM stations.
The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs.
8 To listen to a preset station, press TUNING MODE repeatedly until “PRESET” lights up in the display. Then, press +/– repeatedly to select the preset station you want.
To stop automatic scanning
Press x.
To cancel presetting
Press TUNER MEMORY.