Section 4: Oven and Clock Operation
7.Press 
stop time symbol to set desired time for cooking to be completed. 
stop time
indicator will flash and clock will automatically display the time the oven would normally shut
off if its duration were not delayed. (for example, if 
cook time is set to cook for 2 hours
at 3 o’clock in the afternoon, then after pressing 
stop time the clock will automatically begins after holding 
increase symbol key for over 5 seconds)
8. | To correct time set press increase or decrease as needed. |
9.Press 
start symbol to begin delayed time convection bake function. Display will show time of day. At the start of the delayed time convection bake cooking cycle, the
convection indicator light will glow and temperature in oven will be displayed. Tempera- tures will be displayed in increments of 5F or 5C until programmed temperature is reached.
10.Once the temperature is reached, an audible signal will sound. Cooking will begin after desired temperature is reached.
11.At the completion of delayed time convection bake an audible signal is emitted and the oven
will shut off. The temperature display will go off as well as the | convection indicator light. |
The time of day will then be displayed. |
|
12.Press 
cancel symbol to end delayed time convection bake function at any time.
convection indicator light and temperature display will go off. Only time of day will be displayed.
Note:
1.To verify oven temperature, length of cooking time, or stopping time while the oven is heating
up, press 
convection for temperature, 
cook time or 
stop time symbols respectively for length of time and end time. Information will be displayed for 5 seconds.
29
