Metro / Legacy Series
Top Burner and Grill Operation
Lighting the Top Burners and Grill
Range is equipped with a spark ignition system that is electrically operated. Pushing in and turning the knob to position 3 or lower will provide best lighting results. When the knob is turned, a distinct clicking noise will be heard. After the burner lights, the clicking noise will stop. Note: When lighting any one burner, all
burners will spark, but only the burner
selected will light. All models feature “auto- reignition” – should the flame go out for any reason, the ignitor automatically begins to spark to
Propane Stoves: a slight pop or flash may occur at the burner ports for a few seconds after the burner has been turned off. This “extinction pop” is normal for propane gas, specially if the cooling fan is operating at the time.
Note: Incorrect burner alignement will produce a potentially dangerous flame and poor burner performance (please refer to Fig 19 on page 36 for details)
Small Pot Ring / Trivet
Pot ring support is used when cooking on top burners while using a small pot. It is located in the accessory package inside the oven. The trivet fits on any burner. Each channel fits on one of 4 fingers on the burner grate. (see fig 13)
(fig 13)
This channel fits on a finger on the burner grate.
Dial
Burner - right dial (fig 12)
36
