Metro / Legacy Series
Set Up and Assembly
Safety Instructions
Please check for any damage that may have occurred during shipping. In the unlikely event that you find any shipping damage, inform your dealer immediately!
Legacy and Metro ranges consist of the range body and the splashback. The splashback is fastened to the back of the stove for shipping purposes.
Tools required for assembly:
•Screwdriver
•Utility knife
•Level
•Metal shears
•Hammer
You must have a qualified electrician con- nect the new range to be sure all electrical codes and regulations are observed except when range is equipped with a cord and plug. A qualified gas technician must install this appliance to ensure local installation codes and regulations are observed.
Preparing the Installation Site
Find the appropriate clearance/installation diagram for your range on the following pages. (see fig 1 & 2) Diagrams include installations with an exhaust hood.
These diagrams will outline the required opening for your range and clearances to cupboards, electrical outlets, and gas outlet. Site prepara- tion can be made to have these utilities ready prior to receipt of the range and splashback. Also required before installation of your range, is the placing of the Anti
Follow this procedure to install the anti tip
bracket.
1)the anti tip bracket package (complete with screws) is found in the accessory box inside the oven.
2)on the wall measure up from the floor 5 5/8” and mark that position with a pencil, this is the correct height of the tab on the bracket.
3)at the 5 5/8” height locate a wall stud along that horizontal plane.
4)fasten the bracket to the wall stud at the 5 5/8 height with the 2 screws supplied.
5)use the two holes immediately above the tab in the left side of the bracket, if there is a block- age preventing the use of these holes, use the alternate holes in right side of the bracket.
use these holes to mount bracket
alternate mounting holes
this tab fits over the bottom panel of the appliance, when the appliance is slid into place.
Installation Clearances
Should the range be installed adjacent to a refrig- erator, it is important that there be a minimum of 5” (30 cm) of space between the two appliances for proper air circulation.
Installation of cabinet storage space above the sur- face burners should be avoided at all costs to elimi- nate the risk of burns or fire by reaching over the surface burners. If combustible materials are present above the cooking surface they should be at a minimum distance of 36” from the surface burn- ers.
2
