Sony LBT-ZUX9 To stop recording, 35US, Tape

5 For Manual Recording and Sound Mixing, start playing the source to be recorded.

Tip

If noise is heard while recording from the radio, move the respective antenna to reduce the noise.

6 For Sound Mixing, start singing along with the music and adjust the microphone volume by turning MIC LEVEL.

After you have finished, turn MIC LEVEL to MIN.

To stop recording

Press x.

Notes

•You cannot eject the disc during CD-TAPE Synchro Recording.

•If you connect or disconnect a microphone or headphone during recording, the sound may cut off for a moment.

•If the effector mode is activated while recording, the effect will be recorded onto a tape.

•If the beat pattern is turned on or the drum sound is activated during recording, the beat sound would be recorded onto a tape.

Tip

When high level sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signals (Auto Level Control Function).

Tape

35US

Contents

Page WARNING About this manual The LBT-ZUX9consists of: Table of Contents Getting Started Disc USB Device Tuner Playable discs Discs that cannot be played back Note on DualDiscs Note on CD-R/-RW Music discs encoded with copyright protection technologies Playable/Recordable USB devices Verified Sony digital music player (as of April 2007) Verified Sony USB storage media (as of April 2007) Unit – Front view – Top view Page Page 10US – Display 11US Remote 12US X-TRANCEPRO Remote 13US 14US Getting Started Started Getting AAntennas 15US BSpeakers CPower Inserting two R6 (size AA) batteries into the remote 16US When carrying the unit 17US 18US Disc Other operations Disc 19US 20US 21US 22US To cancel Repeat Play 23US USB Device Recording from a disc onto a USB device 24US To remove the USB device To erase an MP3 audio track or an MP3 audio track folder from the USB device Folder and track generation rules Device USB 25US 26US 27US 28US 29US 30US Tuner To stop automatic scanning To cancel presetting Tuner 31US To improve tuner reception To set to “CD/USB POWER ON” To change the AM tuning interval 32US Tape Tape 33US 34US To stop recording 35US Sound Adjustment Preset effect options 36US Creating a party atmosphere Creating flanging effect – FLANGER Creating delay effect – DELAY Adjustment Sound 37US – CHORUS – AQUA 38US To change the sound movement To change the speed of sound movement To cancel the X-ROUNDeffect Creating the “MAX” and “JUMP” effect following the tempo of the music 39US Creating the “MAX” and “JUMP” effect manually To add the drum sound To change the drum sound To create a drum roll To adjust the volume of the drum To change the beat pattern To change the beat speed To return the beat speed to default setting (BPM 120) 41US 42US Other Operations Operations Other 43US 44US 45US Viewing information in the display during CD and USB function Checking the elapsed playing time, remaining time and titles Checking the total playing time and titles 46US Hooking up the optional components 47US Listening to a connected TV or VCR Listening to a connected MD deck 48US Additional Information When the "/1 indicator flashes General Information Additional 49US 50US Disc player 51US USB device 52US 53US Tape deck 54US Optional components 55US 56US 57US 58US 59US 60US 61US