Setup and Cable Connections
Attaching the Base | Connect the power |
Station stand | cord to the Base |
| Station |
|
To keep the Base Station stable, attach the Base
Station stand.
Base Station rear panel
Note
Place the Base Station at least 4 inches (10 cm) away from the wall.
Insert the claws of the stand into the holes on the bottom of the Base Station and slide the stand forward until they click into place. The two claws differ in size. Fit each claw into its respective hole.
Holes
Claws
Stand
Removing the Base Station stand
Turn the Base Station upside down on a flat stable surface and slide the stand as indicated by the “RELEASE” mark.
| S VIDEO | S VIDEO |
|
|
VIDEO1 IN |
|
| CLIENT |
|
| OUT VIDEO1 | WLAN |
| |
|
|
| AP |
|
VIDEO | VIDEO |
|
| |
| L | L | LAN |
|
AUDIO | AUDIO |
|
| |
R | R | 1 |
| |
|
|
|
| |
| Y | Y | IR |
|
|
|
| BLASTER |
|
(VIDEO/COMPONENT)IN |
| (VIDEO/COMPONENT)OUT | 2 |
|
PB |
|
| ||
| PB |
|
| |
| PR | PR |
|
|
VIDEO 2 |
| VIDEO 2 |
| AC power adapter |
VIDEO | VIDEO | DC IN 12V | ||
| L | L |
| (supplied) |
AUDIO | AUDIO |
|
| |
R | R |
|
| |
To DC IN
Power cord 
(supplied)
Wall outlet
Connect the power cord to the Base Station AC power adapter, and the AC power adapter to the DC IN jack on the Base Station, then plug the power cord into a wall outlet.
Note
Use only the supplied AC power adapter.
Connections Cable and Setup
11