Performing the

NetAV check

When the automatic NetAV check has failed, the NET AV LED of the Base Station lights amber. In this case, perform the NetAV check from the [Base Station Settings] page manually.

1 Click [NetAV Check] on the [Base Station Settings] page.

[NetAV Check] screen appears.

[NetAV Check]

If NetAV Check is incomplete

Read the instructions on the [NetAV Check] page and configure the necessary settings.

When you watch video via the Internet, the router must be UPnP compatible and the UPnP function of the router must be enabled. Refer to the Operating Instructions for your router and confirm the settings.

If your router is not UPnP compatible, prefer not to use the UPnP function of the router, or use the UPnP function but the NetAV check is unsuccessful, port forwarding needs to be set on the router.

zTips

Setting port forwarding on the router requires a static IP address to be set in the [Internet Connection] frame of the [Base Station Settings] page. For details, refer to the operating instructions for the router and “Setting a Router Incompatible with the UPnP Function” (1page 25).

Some UPnP compatible routers are only compatible with specific messenger services and games. For such a router, set port forwarding on the router.

2 Click [Check].

The NetAV check starts.

[Check]

Settings Station Base

23