Initializing the Base Station

If you initialize the Base Station, all settings are reset to factory default.

Note

After initializing, all of the settings you made will be deleted, including the device registration information.

zTip

If you want to initialize the wireless settings, initialize them from the Wireless Settings screen (1page 27 and 29) rather than initializing the Base Station.

1 Turn off the Base Station.

2 While pressing the RESET button with a sharp-pointed object (e.g., a pen) on the front of the Base Station, turn on the POWER. Hold down the RESET button until the NET AV LED on the front of the Base Station lights red.

Base Station front panel

POWER button

WIRELESS

NETWORK

NET AV

 

NET AV LED

SETUP

MODE

RESET button RESET

Others

34