1
2
3
4
5
6
7
8
9
1Select whether to assign an IP address to the Base Station automatically, using the DHCP function of your router or modem, or to assign an IP address manually.
If you select [Automatic IP Address Configuration (DHCP)], the router’s DHCP server will automatically assign the [IP Address], [Subnet Mask] and [Default Gateway].
If you select [Manual], contact your contracted ISP to assign the proper values in the [IP Address], [Subnet Mask], [Default Gateway] and [Host Name] fields.
At the time of purchase, this item is set to [Automatic IP Address Configuration (DHCP)].
2Enter an IP address.
3 Enter a subnet mask.
4 Enter a default gateway.
5 Enter a host name for the Base Station, as required.
zTip
The host name can be specified only when [Automatic IP Address Configuration (DHCP)] is selected.
6The Base Station’s MAC addresses appear.
7 Depending on the operating environment, the domain name appears.
8Select whether to assign the DNS server automatically, or to assign the DNS server manually.
The DNS server is only assigned automatically if [Automatic IP Address Configuration (DHCP)] is set for the IP address.
If you select [Manual], enter the addresses of your ISP's DNS servers in the [DNS1] and
[DNS2] fields.
[Auto] is selected at the time of purchase.
9Click this to save changes.
Wireless Settings (Access Point)
When you set the WLAN switch to “AP,” you can change the wireless settings for the Access Point mode of the Base Station. If you have changed the settings of the Base Station, you should also change the wireless settings of the LocationFree® client devices.
1
2
3
4
5
6
1Wireless LAN devices that conform to the IEEE802a/b/g standards can be used on the following channels. When connecting your computer to the Base Station via a wireless connection, select a channel supported by the LAN device.
•IEEE802.11a wireless LAN device: 5 GHz
•IEEE802.11b wireless LAN device: 2.4 GHz
•IEEE802.11g wireless LAN device: 2.4 GHz
Settings Station Base
27