When operating two video devices with the IR Blaster, set the video devices and the IR Blaster as shown.

IR Blaster

Remote sensors

If the infrared receivers on the two video devices do not line up like the illustration above, you need to purchase an optional IR Blaster (VM-50, not supplied) and install it.

Note

For details on setting up a video device, refer to the operating instructions of the video device.

zTips

•If the IR Blaster cable is too short, use the 3.5 mm jack extension cable (not supplied).

•Remote sensors on Sony Recorders and other products are identified by the symbol.

•You can set up two on-screen remote controls for each video input connector, except if you add new buttons to the first remote control by the "Add buttons" feature. These on-screen remote controls allow you to operate two video devices connected directly to the Base Station, and to control video

input via those video devices. For more details, refer to the LocationFree® Player’s Help.

Connections Cable and Setup

17