The Features of the Base Station

Automatic NetAV check

Automatic NetAV check tests the settings of your Base Station and your router to see if LocationFree® client devices can connect to the Base Station via the Internet.

When you turn your Base Station on, the NET AV LED starts blinking green, and then the automatic NetAV check starts. If the NET AV LED goes off, the test has finished successfully.

If the NET AV LED lights amber, the check has failed. In this case, open the [Base Station Settings] page and perform NetAV check manually to check the cause of the problem (1 page 23).

Automatic NetAV check starts when the Base Station is turned on. Also, it starts at regular intervals.

Receiving remote signals

Learning remote control

With LocationFree® Player LFA-PC30, the Base Station can learn signals of the remote of a video device to control the video devices with the on- screen remote control. For more details, refer to the LocationFree® Player’s Help.

Searching remote control data

When you make settings of the on-screen remote control with LocationFree® Player LFA-PC30, you can search the remote control data of your video device from the list of the available models by sending out the signal from the remote of your video device to the Base Station. For more details, refer to the LocationFree® Player’s Help.

Station Base the of Features The

Note

Hold the remote within 2 inches of the Remote (IR) sensor (1page 7) of the Base Station.

20