Base Station Settings
The appearances and the available setting items differ depending on the LocationFree® client devices connected to the Base Station. This section explains the settings by using a computer installed with LocationFree® Player (LFA- PC30).
1 Click 
of the Base Station you want to set in the list.
The procedure to open the [Base Station Settings] page depends on the device. For more details, refer to the Operating Instructions of the device.
Opening the [Base Station Settings] page
The [Base Station Settings] page is accessed and | [Properties] |
| |
set from your web browser. You can make more |
|
detailed settings, such as changing a wireless | 2 Click [Base Station Settings]. |
LAN encryption key, in the [Base Station | |
Settings] page. |
|
Before making settings
Check to be sure that the Base Station is powered on.
zTip
After you turn the Base Station on, it takes a while for a DHCP server to assign an IP address to the Base Station. Your Base Station does not appear in the Base Station list until the DHCP server assigns an IP address to the Base Station. Wait until the NETWORK LED lights, and then proceed to 1.
Notes
•You cannot open the [Base Station Settings] page via the Internet.
•At the time of purchase, you can open the [Base Station Settings] page with a device which has a private IP address only.
[Base Station Settings]
Your web browser starts and the [Base Station Settings] page opens.
Settings Station Base
22