Basic Operations in the [Base Station Settings] Page

This section explains the operations common to each frame in the [Base Station Settings] page.

1

3

2

1Click the item to configure.

The information for the clicked item appears in the frame on the right.

2Return to the [Base Station Settings] page.

3 Make settings or perform operations for the selected item.

If you make any settings, be sure to click [Set] to save the changes.

The remainder of this section explains the specific settings and operations of each frame in the [Base Station Settings] page.

NetAV Settings

Set the port of the Base Station when the NetAV function is to be used.

1

2

3 4

1If there are multiple Base Stations and 5026 is already being used, change the port number of the NetAV server.

You can specify port numbers in the range 5021 to 5999.

At the time of purchase this item is set to 5026.

2Select whether to enable or disable automatic updating for the Dynamic DNS. At the time of purchase, this is set to [Enable]. If [Enable] is set, the automatic NetAV check is performed

on the same occasion.

3Select whether to enable or disable automatic router configuration (UPnP).

When [Disable] is set, port forwarding needs

to be set on the router.

At the time of purchase, this is set to [Enable].

4Click this to save changes.

Setting a Router Incompatible with the UPnP Function

Select to disable automatic router configuration (UPnP) in the NetAV settings, and when port forwarding needs to be set on the router, follow the procedure below to set the Base Station’s IP address.

zTip

The IP address, subnet mask, and default gateway used in the following procedure are only examples. Before you configure these settings, check the IP address settings of the router.

1 Set [IP Address Settings] to [Manual] in the [Internet Connection] frame and then enter the following information (1 page 26).

IP Address: 192.168.0.64*1

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1*2

*1 Example when the IP address of the router is 192.168.0.1. If the IP address of the router is 192.168.1.1, enter 192.168.1.64 for the IP address. If you are using multiple Base Stations, set a different setting for each Base Station, such as 64 and 65.

*2 Example when the IP address of the router is 192.168.0.1. If the IP address of the router is 192.168.1.1, enter 192.168.1.1 for the default gateway.

Settings Station Base

25