Table of Contents

 

Precautions ..................................................................................................................

3

Functions of Controls .................................................................................................

4

Connections .................................................................................................................

8

Installation ...................................................................................................................

9

Adjustments ..............................................................................................................

10

Using the unit in index mode .................................................................................

11

Specifications .............................................................................................................

12

Troubleshooting ........................................................................................................

13

Precautions

 

Using the unit

•Use the unit under stable temperatures between 0 °C and 40 °C (32 °F and 104 °F).

•Prevent internal heat build-up by allowing adequate air circulation. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes.

•Do not install the unit near heat sources such as radiators or air ducts, nor in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

•Do not place the unit near equipment which generates magnetism, such as a converter or high voltage power lines.

•Do not use the unit near equipment which generates a strong electric field or radiation.

•Do not use the unit near an AM/FM tuner. The unit may cause noise on the tuner.

•When you turn on the unit and display the video signal in under-scan mode in low temperature, you may find jitter or double-image. This is not a malfunction of the unit.

Wait for a few minutes until jitter or double-image automatically disappears.

Notes on handling the LCD screen

•Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when you place the unit by a window.

•Do not push or scratch the LCD screen. Do not put a heavy object on the LCD screen. This may cause malfunction and the display may not appear uniform.

•If the unit is used in a cold place, a residual image may appear on the screen. This is not a malfunction of the unit. When the unit becomes warm, the screen returns to normal.

•If a still picture is displayed for a long time, a residual image may appear. The residual image will disappear in a while.

•Bright points of light (red, blue or green) may appear constantly on the LCD screen. This is not a malfunction. The LCD screen is made with high-precision technology and has more than 99.9 % of effective picture elements. However, 0.01 % of picture elements may not appear or some picture elements may appear constantly.

•The screen and the cabinet become warm during operation. This is not a malfunction.

Replacement of the fluorescent tube

An exclusive fluorescent tube is installed as the lighting apparatus of this unit. If the LCD screen becomes dark, unstable or does not turn on, replace the fluorescent tube with an new one. Consult your Sony dealer.

Power saving function

When there is no input signal, “NO. SYNC” appears on the screen and the backlight turns off after about 5 seconds. When a signal is input again, the backlight turns on automatically.

If the fan motor stops suddenly

If the fan motor stops suddenly, the power of this unit is turned off automatically to protect the fan motor.

If the fan motor stops suddenly, “WARNING” appears on the LCD screen and the power is turned off after about 60 seconds. If this happens, disconnect the power cord and consult your Sony dealer.

Maintenance

•Make sure to disconnect the power cord before cleaning the unit.

•Avoid robbing the LCD screen as it can damage the LCD screen. Use a dry and soft cloth to wipe the LCD screen.

•Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such as alcohol or benzine.

Notes on handling the remote commander

•Handle the remote commander carefully. Do not drop or step on the remote commander. Keep liquid away from the remote commander.

•Do not place the remote commander under direct sunlight, near heat sources or in a humid place.

J

EN

D

F

ES

I

3