Connections
Before you get started

•First make sure that the power of each piece of equipment is turned off.

•Use connecting cables suitable for the equipment to be connected.

•Insert the cable connectors fully into the jacks. A loose connection may cause hum and other noise.

•To disconnect the cable, pull out by grasping the plug. Never pull the cable itself.

•Read the instruction manual of the equipment to be connected.

•Use the Sony specific cable (not supplied) to connect the external control jacks.

•Use the following Sony cable (not supplied) to connect the LINE C connector.

Computer

Cable

Macintosh 1)

SMF-401 and Macintosh adaptor (not

 

supplied)

VGA 2)

SMF-401

PC-98 3)

SMF-401 and PC-98 series adaptor (not

 

supplied)

1)Macintosh is a registered trademark of Apple Computer Inc.

2)VGA is a registered trademark of IBM.

3)PC-98 is a registered trademark of NEC Corporation.

SignalCable

YUVSMF-400

Video-RGBSMF-400

Example of the equipment to be connected

Personal computer, institutional video camera/VTR, etc.

Institutional VTR, laser disc player, etc.

VTR, laser disc player, video game, etc.

to analog RGB output or component signal (YUV) output

to control

 

to Y/C IN of

jack of other

 

other

equipment

 

monitor

 

 

 

to audio

to S video

output

output

YC-5V cable, etc.

RK-G129 cable, etc.

Power cord (supplied)

to a wall outlet

to VIDEO IN of other monitor

to control S output of other monitor

RK-G67 cable, etc.

to control S input of other monitor

8