Adjustment Using the Menus
22
Submenu Setting
SUB CONTROL Adjusts finely the adjustment range
of the function buttons which
CONTRAST, BRIGHTNESS,
CHROMA and PHASE are
assigned.
•CONTRAST: Adjusts the
picture contrast.
•BRIGHTNESS: Adjusts the
picture brightness.
•CHROMA: Adjusts color
intensity. The higher the
setting, the greater the
intensity. The lower the
setting, the lower the
intensity.
•PHASE: Adjusts color tones.
The higher the setting, the
more greenish the picture.
The lower the setting, the
more purplish the picture.
•APERTURE: Adjusts the picture
sharpness.
The higher the setting, the
sharper the picture. The
lower the setting, the softer
the picture. APERTURE
does not work when the
camera focus function is
activated.
•BACKLIGHT: Adjusts the
backlight. When the setting
is changed, the brightness of
the backlight is changed.
•VOLUME: Adjusts the volume.
AUTO CHROMA/PHASE
AUTO ADJ VALUE: xx
START:
USER CONTROL 2/3
PICTURE CONTROL
ACC: xx
CTI: x
V SHARPNESS: x
INPUT SETTING
SHIFT H: xxx
SHIFT V: xx
USER CONTROL 3/3
SUB CONTROL
CONTRAST: x
BRIGHTNESS: x
CHROMA: x
PHASE: x
APERTURE: x
BACKLIGHT: x
VOLUME: x
USER CONTROL 1/3
AUTO CHROMA/
PHASE
Adjusts color intensity (CHROMA)
and tones (PHASE).
•AUTO ADJ VALUE: Selects
ON or OFF of the auto
adjustment. When you set to
OFF, this parameter is reset
to the factory setting. When
you set to ON, the
automatically adjusted value
is enabled.
•START: The auto adjustment
starts when you display the
color bar signals (Full/
SMPTE/EIA) on the screen
and press the menu selection
control. After adjusting the
color intensity, press the
MENU button to clear the
adjustment screen. After the
adjustment is done correctly,
the AUTO ADJ VALUE is
automatically set to ON.
PICTURE CONTROL Adjusts the picture.
•ACC (Auto Color Control):
Sets ACC circuit on or off.
To check the fine
adjustment, select OFF.
Normally select ON.
•CTI (Chroma Transient
Improvement): When a low
color resolution signal is
input, a crisp image can be
displayed. When the setting
is higher, the picture
becomes even more crisp.
•V SHARPNESS: A crisp image
can be displayed. When the
setting is higher, the picture
becomes even more crisp.
INPUT SETTING • SHIFT H: Adjusts the position of
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
•SHIFT V: Adjusts the position of
the picture. As the setting
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.
Submenu Setting