Sony LMD-941W - page 31

Adjustment Using the Menus 31

Submenu Setting

PARALLEL REMOTE Selects the PARALLEL REMOTE

connector pins for which you want

to change the function.

You can assign various functions to

1 to 4 pins and 6 to 8 pins. The

following lists the functions you

can assign to the pins.

• – – – (“– – –”: No function is

assigned.)

•COMPOSITE

• HDMI

•SDI 1

•SDI 2

• WFM/ALM/VS

• OVERSCAN

• NORMAL

• NATIVE

•4:3

•16:9

•TALLY R

•TALLY G

• BLUE ONLY

• MONO

•H/V DELAY

•16:9 MARKER

•15:9 MARKER

•14:9 MARKER

•13:9 MARKER

• 1.85:1 MARKER

• 2.35:1 MARKER

• 1.85:1 & 4:3 MARKER

•4:3 MARKER

• CENTER MARKER

• MARKER MAT HALF

• MARKER MAT BLACK

• SAFE AREA 80%

• SAFE AREA 85%

• SAFE AREA 88%

• SAFE AREA 90%

• SAFE AREA 93%

Notes

• If you use the PARALLEL

REMOTE function, you need to

connect cables. For more details,

see page34.

• Set MARKER ENABLE

(page 24) to ON to control the

aspect marker and center

marker.

FORCED TALLY The tally lamp function is forcibly

assigned to 7 pin and 8 pin of the

PARALLEL REMOTE connector.

Selecting ON assigns tally lamp

green to 7 pin and tally lamp red to

8 pin.

ON: Forcibly assigns the

tally lamp function.

OFF: The tally lamp

function is not forcibly

assigned.

Note

When OFF is selected, any listed

functions can be assigned to 7 and 8

pins. Selecting ON with any

function other than the tally lamp

assigned to 7 and 8 pins will ignore

this setting, and the tally lamp is

forcibly assigned to 7 and 8 pins

instead.

SERIAL REMOTE Selects the mode to be used.

•OFF: SERIAL REMOTE does

not function.

•ETHERNET: The monitor is

controlled by the command

of Ethernet.

•BKM-15R/16R: Sets BKM-15R

or BKM-16R.

MONITOR Sets the monitor setting.

MONITOR ID: Sets the ID

of the monitor.

GROUP ID: Sets the group

ID of the monitor.

IP ADDRESS: Sets the IP

address.

SUBNET MASK: Sets the

subnet mask.

(255.255.255.000)

DEFAULT GATEWAY:

Sets the default gateway on

or off.

ADDRESS: Sets the default

gateway.

CANCEL: Selects to cancel

the setting.

CONFIRM: Selects to save

the setting.

CONTROLLER Sets the address of the remote

controller.

IP ADDRESS: Sets the IP

address.

SUBNET MASK: Sets the

subnet mask.

(255.255.255.000)

DEFAULT GATEWAY:

Sets the default gateway on

or off.

ADDRESS: Sets the default

gateway.

CANCEL: Selects to cancel

the setting.

CONFIRM: Selects to save

the setting.

Submenu Setting

Contents

Main Owners Record WARN ING Page Table of Contents Precaution On Safety On Installation Handling the LCD Screen On Burn-in On Cleaning On Dew Condensation On Repacking On Mounting on a Rack Disposal of the Unit Features Page Location and Function of Parts and Controls Front Panel Using the stand Input Signals and Adjustable/Setting Items Rear/Bottom Panel Installing the Handle Page Power Supply Attaching the AC Adaptor Connecting the AC Power Cord Selecting the Default Settings 2 4 Selecting the Menu Language To clear the menu Using the Menu To return the display to the previous screen To clear the menu About the memory of the settings Adjustment Using the Menus Items STATUS (the items indicate the current settings.) COLOR TEMP/SPACE USER CONTROL Adjusting and Changing the Settings STATUS menu COLOR TEMP/SPACE menu USER CONTROL menu Page USER CONFIG menu SYSTEM SETTING MARKER SETTING T/C (time code) DISPLAY SETTING IMD (in-monitor display) SETTING CAMERA1 WFM/ALM/VECTOR (waveform monitor, audio level meter, and vectorscope) SETTING FOCUS SETTING FUNCTION BUTTON SETTING About the function assigned to the function button Scan mode image CLOSED CAPTION SETTING AUDIO SETTING REMOTE menu PARALLEL REMOTE Page KEY INHIBIT menu Troubleshooting Specifications Picture performance General Pin assignment Available signal formats Dimensions Front Unit: mm (inches) Side Bottom (Without the stand)