Adjustment Using the Menus
26
WFM/ALM/VECTOR (waveform monitor, audio level meter, and vectorscope) SETTING
Submenu Setting
DISPLAY Select ON to display the WFM
(waveform monitor), ALM (audio level
meter), or VECTOR (Vectorscope) or
OFF not to display.
WFM/ALM/
VECTOR
Sets the display settings for WFM/ALM/
vectorcope.
•WFM: Displays the wave form
monitor.
•ALM: Displays the audio level meter.
•VECTOR: Displays the vectorscope.
When WFM is selected, the waveform
and audio level are displayed. When
ALM is selected, the audio level is
displayed in eight channels.
When VECTOR is selected, the color
component of the image signal and the
audio levels are displayed.
When SDI signal is input, the audio
levels for channels selected in SDI
AUDIO SETTING are displayed.
Each display type is illustrated below.
(The waveform percentage and audio
level units/values do not appear on the
display.)
DISPLAY: xxx
WFM/ALM/VECTOR: xxxxxx
POSITION: x
TRANSPARENCY: xxxxx
COLOR: xx
INTENSITY: x
ZOOM: xxx
LINE SELECT: xxx
LINE POSITION: xxx
USER CONFIG – WFM/ALM/VECTOR SETTING 1/2
TARGET: xxx
USER CONFIG – WFM/ALM/VECTOR SETTING 2/2
When WFM is selected
When ALM is selected
Submenu Setting
-4%
0%
50%
100%
0
OVER
(dB)
-10
-20
-30
-60
12
109%
Audio levelWaveform
Channel number
(The channel number which is selected in
SDI AUDIO SETTING is displayed.)
0
(dB)
-10
-20
-30
-60
OVER
12345678
Audio level
Channel number
(Displayed in eight channels, including the channel
which is selected in SDI AUDIO SETTING.)