Playing MDs

Falling Asleep to Music

You can let the deck turn off at the specified time, so you can sleep to the music.

You can specify the time to be turned off by 30 minutes.

MENU/NO ~ ￿AMS ±

0 )

§ ( P p r

1Press MENU/NO twice to display “Setup Menu”.

2Turn AMS to select “Setup 14”, then press AMS.

3Turn AMS to select the time.

The minutes display changes as follows: 30min ˜60min ˜90min ˜120min

4Press AMS.

5Turn AMS to select “Setup 15”, then press AMS.

6Turn AMS to select “Sleep On”, then press AMS. “SLEEP” lights up in the display.

7Press MENU/NO.

To change the time to turn off

Start over from Step 1 above.

To cancel the Sleep Timer Function

Select “Sleep Off” in Step 6 above, then press AMS.

Changing the Pitch (Pitch Control Function)

You can change the MD playback speed (pitch). The tone rises at higher pitches, and falls at lower pitches. When you’ve set the pitch to a value other than the factory setting, the PITCH CONTROL button lights amber during play.

PITCH CONTROL

~ ￿AMS ±

 

0 )

 

§ ( P p r

Setting the pitch automatically in steps (Auto Step Control Function)

You can increase the pitch by up to 2 steps* or lower the pitch by up to 48 steps.

*One octave equals 12 steps.

1While the deck is playing, press PITCH CONTROL repeatedly until “Pitch” appears in the display.

2Turn AMS until the desired step value appears.

To recall the factory setting

Press CLEAR while setting the value.

Notes

•When you change the step value, the playback sound drops out momentarily.

•The step value returns to “0” (factory setting) when you turn off the deck or eject the MD.

•When a dot (.) appears to the right of the step value in the pitch display, this indicates that you have performed fine adjustment (see the next page) and the pitch value is between steps. (The step and fine control values are linked.)

32GB