Getting Started
Connect the amplifier to the LINE(ANALOG) IN/OUT jacks using the audio connecting cords (supplied), making sure to match the
MD deck | ç | Amplifier | ||
LINE(ANALOG) | TAPE/MD | |||
| ||||
IN | OUT |
| OUT | |
L | L |
| L | |
R | R | Ç | R |
ç: Signal flow
Connecting the deck to a digital component such as a CD player, DAT deck, digital amplifier, or another MD deck
Connect the component through the DIGITAL IN/ OUT connectors with two (or three) optical cables (not supplied) and/or two coaxial digital connecting cables (not supplied).
When using the optical cables
Take the caps off the connectors and then insert the plugs parallelly until they click into place.
Be sure not to bend or tie together the optical cables.
MD deck | Digital component | |
DIGITAL IN | DIGITAL OUT | DIGITAL |
COAXIAL OPT1 OPT2 | COAXIAL OPTICAL | OPTICAL |
|
| IN OUT |
ç
Ç
You can connect the optical cable to either OPT1 or OPT2
ç: Signal flow
When using the coaxial digital connecting cable
MD deck | Digital component | |
DIGITAL IN | DIGITAL OUT | DIGITAL |
COAXIAL OPT1 OPT2 | COAXIAL OPTICAL | COAXIAL |
|
| |
|
| IN OUT |
|
| Ç |
Ç
ç: Signal flow
zIf “Din Unlock” and “C71” appear in the display
Make sure the optical cable or the coaxial digital connecting cable is connected properly.
zAutomatic conversion of digital sampling rates during recording
A
Note
If “Din Unlock” alternates with “C71”, or “Cannot Copy” appears in the display, recording through the digital connector is not possible. In this case, record the program source through the LINE(ANALOG) IN jacks with the INPUT set at ANALOG.
Connecting the AC power cordConnect the AC power cord to a wall outlet or to the outlet of a timer.
5GB