Playing MDs

Playing With Different Tones (Digital Filter)

This deck is equipped with the V.C. (Variable Coefficient) filters to allow you to adjust the tone to match your audio system, listening environment, and the source being played. Note that the digital filters are effective only on the analog signals output from the LINE(ANALOG) OUT jacks and the PHONES jack.

0 )

§ ( P p r

FILTER

1Press FILTER.

The currently selected filter appears in the display.

2Press FILTER repeatedly to select the filter you want.

Select

To produce

 

 

FILTER-STD

An expansive sound of wide range.

(factory setting)

 

 

 

FILTER-1

A sound that is clearly positioned and

 

smooth.

 

 

FILTER-2

A fresh and powerful sound.

 

 

FILTER-3

A resonant and mellow sound.

 

 

The FILTER button lights green when a setting other than “FILTER-STD” is selected in DF (digital filter) display.

zYou can use the remote to select the filter Z

Press FILTER repeatedly until the filter you want appears in the display.

zWhat is a V.C. (Variable Coefficient) filter?

A variable coefficient filter changes the sound characteristics of a signal by applying specific frequency cut-off conditions. Such filters are provided on digital devices such as CD players and MD decks to remove aliasing noise.

Note

The change in sound characteristics caused by digital filters occur mainly in the inaudible range, not the audible range as in the case of an amplifier.

34GB