Operating the
MD Deck
Using a
Keyboard
This chapter explains simple ways to name a track or MD using an optional keyboard, as well as how to operate the MD deck directly using the keyboard.
GB 46 Setting the keyboard
You can use any
1)IBM is the registered trademark of International Business Machines Corporation.
2)Power consumption must be 120 mA or less.
MENU/NO
KEYBOARD | AMS | YES |
Connecting a keyboard to the MD deck
Connect the keyboard connector to the KEYBOARD jack on the front panel of the deck.
You can connect or disconnect the keyboard at any time regardless of whether the deck is turned on or off.
Selecting keyboard type
The first time you connect a keyboard, you need to select the keyboard type.
1While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until “Keyboard ?” appears, then press AMS or YES.
3Turn AMS (or press ./> repeatedly) until “Type” appears, then press AMS or YES.
4Turn AMS (or press ./> repeatedly) to select the setting, then press AMS or YES.
To use the keyboard with | Select |
|
|
English keyboard layout | US (factory setting1)) |
Japanese keyboard layout | JP |
|
|
1)You can also recall the factory setting by pressing
CLEAR.
5Press MENU/NO.