Specifications
System | MiniDisc digital audio system |
Disc | MiniDisc |
Laser | Semiconductor laser (λ = 780 nm) |
| Emission duration: continuous |
Laser output | MAX 44.6 µW 1) |
Outputs |
|
PHONES | Jack type: stereo phone |
| Rated output: 28 mW |
| Load impedance: 32 ohms |
ANALOG OUT | Jack type: phono |
| Rated output: 2 Vrms (at 50 |
| kilohms) |
| Load impedance: over 10 kilohms |
DIGITAL OPTICAL OUT Connector type: square optical Rated output:
Laser diode Revolutions (CLV) Error correction
Sampling frequency Coding
Modulation system
Number of channels Frequency response
Inputs
ANALOG IN
DIGITAL OPTICAL IN1
DIGITAL OPTICAL IN2
DIGITAL COAXIAL IN
1)This output is the value measured at a distance of
200 mm from the objective lens surface on the Optical
Material: GaAlAs
400 rpm to 900 rpm
ACIRC (Advanced Cross Interleave Reed Solomon Code)
44.1 kHz
ATRAC (Adaptive TRansform Acoustic Coding)/ATRAC 3
EFM
Modulation)
2 stereo channels
5 to 20,000 Hz ±0.3 dB
Over 100 dB during play
Below measurable limit
Jack type: phono
Impedance: 47 kilohms
Rated input: 500 mVrms
Minimum input: 125 mVrms
Connector type: square optical
Impedance: 660 nm (optical wave length)
Connector type: square optical
Impedance: 660 nm (optical wave length)
Jack type: phono
Impedance: 75 ohms
Rated input: 0.5
Load impedance: 660 nm (optical wave length)
DIGITAL COAXIAL OUT Jack type: phono
Rated output: 0.5
Load impedance: 75 ohms
General
Power requirements
Where purchased | Power requirements |
|
|
U.S.A. and Canada | 120 V AC, 60 Hz |
|
|
Europe | 230 V AC, 50/60 Hz |
|
|
Power consumption | 18 W |
Dimensions (approx.) | 430 ⋅ 111 ⋅ 286 mm (17 ⋅ 4 3/8 ⋅ |
| 11 3/8 in.) (w/h/d) incl. projecting |
| parts and controls |
Mass (approx.) | 5.3 kg (11 lbs 11 oz) |
Supplied accessories
See page 10.
US and foreign patents licensed from Dolby Laboratories.
Design and specifications are subject to change without notice.
Information Additional
55 GB
Specifications