Playing MDs

Fading In and Out (Fader)

You can gradually increase the playback level of the signal output to the LINE (ANALOG ) OUT jacks and the PHONES jack at the beginning of a playback (fade- in playback) or gradually decrease the playback level at the end of a playback (fade-out playback).

This function is convenient when, for example, you want to start or end playback in the middle of the track.

 

Z 21

–

22

23

. 24

, 25

FADER

 

>25

 

REPEAT

A˜B

A.SPACE

M.SCAN

/

?

WRITE

 

CLEAR

)

 

!

 

(

 

 

NAME

 

CHAR

NUM

 

 

 

 

 

·

 

P

p

 

 

=

 

+

 

r

 

 

 

 

 

 

 

T.REC MUSIC SYNC

 

 

0

 

)

 

 

 

 

 

 

CD-SYNC

 

 

 

 

 

STOP

 

START STANDBY

 

 

 

 

CD PLAYER

 

FADER

 

P = +

LEVELFADER

Fade-in playback

During playback pause, press FADER at the position where you want fade-in playback to start.

Zin “Fade Z3.2s” flashes and the deck performs fade- in playback until the counter reaches to “0.0s”.

Fade-out playback

During playback, press FADER at the position where you want fade-out playback to start.

zin “Fade z3.2s” flashes and the deck performs fade- out playback until the counter reaches “0.0s”.

The deck changes to playback pause when fade-out playback finishes.

Note

The signal level output to the DIGITAL OPTICAL OUT connector does not change.

zYou can set the duration of fade-in and fade-out playback independently

Do Steps 1 to 5 in “You can set the duration of the fade- in and fade-out recording independently” on page 17.

Playing an MD Using a Timer

By connecting a timer (not supplied) to the deck, you can start and stop playback operations at specified times. For further information on connecting the timer or setting the starting and ending times, refer to the instructions that came with the timer.

§EJECT

￿AMS ±

0 ) r

· P p

TIMER PLAY MODE

·

1Do Steps 1 to 3 in ”Playing an MD” on page 8.

2Press PLAY MODE repeatedly (or one of the PLAY MODE buttons once) to select the play mode you want.

To play only specific tracks, create a program (see page 23).

3• If you want to specify the time for the start of playback, go to Step 4.

•If you want to specify the time for the end of playback, press · to start playback, then go to

Step 4.

•If you want to specify the time for both start and end of playback, go to Step 4.

4Set TIMER on the deck to PLAY.

5Set the timer as required.

•When you have set the time for the start of playback, the deck turns off. When the specified time arrives, the deck turns on and starts playing.

•When you have set the time for the end of playback, playback continues. When the specified time arrives, the deck stops playing and turns off.

•When you have set the time for both the start and end of playback, the deck turns off. When the starting time arrives, the deck turns on and starts playing. When the ending time arrives, the deck stops playing and turns off.

6After you have finished using the timer, set TIMER on the deck to OFF.

26EN