Sony MDS-JE520 Playing an MD, Press ·, Press 1/u, for MD deck, Insert an MD, The STANDBY indicator turns off, The deck starts playing. Adjust the volume on the amplifier

Basic Operations

Playing an MD

2 3 4

STANDBY

§EJECT

REC MODE	INPUT
•STEREO	•OPT
•	•COAX
MONO	•ANALOG

TIMER				MENU/NO	￿ AMS ± YES		REC
		FADER		LEVEL/	0	)	r
			SCROLL	DISPLAY/CHAR
REC OFF PLAY	PHONE LEVEL
PHONES
		PLAY MODE	REPEAT	TIME	·	P	p
				CLEAR
	MIN	MAX
					PUSH ENTER

zYou can locate and play back a track while the deck is stopped

1Turn AMS (or press = or +) until the number of the track you want to play appears.

2Press AMS or ·.

zTo use headphones

Connect them to PHONES jack. Use PHONE LEVEL to adjust the volume.

zYou can adjust the analog signal level output to the LINE (ANALOG) OUT jacks

1While the deck is playing, press LEVEL/DISPLAY/ CHAR repeatedly until the line output adjustment display appears.

2Turn AMS (or press LEVEL +/–) to adjust the output signal level.

Notes

•The output level for the PHONES jack is also changed.

•When you eject the MD or turn off the power by pressing the 1/uswitch, the output level is reset to the initial setting (0.0dB).

1	Turn on the amplifier and set the source selector to the position
	for MD deck.
2	Press 1/u.
	The STANDBY indicator turns off.
3	Insert an MD.

With the label side up

With the arrow pointing this way

4	Press ·.
	The deck starts playing. Adjust the volume on the amplifier.
To		Do the following:
Stop playing		Press p.
Pause playing		Press P. Press the button again or press ·to
		resume playing.
Go to the next track		Turn AMS clockwise (or press +on the
		remote).
Go to the current track		Turn AMS counterclockwise (or press = on the
or the preceding track		remote).
Take out the MD		Press §EJECT after stopping playing.

8EN