Playing MDs

Useful Tips When Recording From MDs to Tape

MENU/NO

§EJECT

￿AMS ±

0 ) r

· P p

￿ AMS ±

Inserting blank spaces while recording to tape (Auto Space)

The Auto Space Function inserts a 3-second blank space between each track while recording from MDs to tapes, allowing you to use the AMS function during later playback.

1While the deck is stopped, press MENU/NO twice to display “Setup Menu”.

2Turn AMS to select “Setup 04”, then press AMS.

3Turn AMS to select “Auto Space”, then press AMS.

4Press MENU/NO.

zYou can turn on the Auto Space Function using the remote Z

While the deck is stopped, press A.SPACE repeatedly until “Auto Space” appears in the display.

To cancel Auto Space

Cancelling the function through menu operation on the deck

1Do Steps 1 and 2 in “Inserting blank spaces while recording to tape” on this page.

2Turn AMS to select “Auto Off”, then press AMS.

3Press MENU/NO.

Cancelling the function using the remote Z

While the deck is stopped, press A.SPACE repeatedly until “Auto Off” appears.

Note

If the Auto Space Function is on while recording a selection containing multiple track numbers, (for example, a medley or symphony), blank spaces will be inserted within the selection whenever the track number changes.

Pausing after each track (Auto Pause)

When the Auto Pause Function is on, the deck pauses after playing each track. Auto Pause is convenient when recording single tracks or multiple, nonconsecutive tracks.

Select “Auto Pause” instead of “Auto Space” in Step 3 on “Inserting blank spaces while recording to tape” on this page.

zYou can turn on the Auto Pause Function using the remote Z

While the deck is stopped, press A.SPACE repeatedly until “Auto Pause” appears in the display.

To restart playback

Press ·or P.

To cancel Auto Pause

Cancelling the function through a menu operation on the deck

Do Steps 1 to 3 in “To cancel Auto Space” on this page.

Cancelling the function using the remote Z

While the deck is stopped, press A.SPACE repeatedly until “Auto Off” appears.

Note

If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Auto Space and Auto Pause Functions the next time you turn on the deck.

Adjusting the analog signal level

You can adjust the level of an analog signal for output to an amplifier connected through the LINE (ANALOG) OUT jacks.

1While the deck is stopped, press MENU/NO twice to display “Setup Menu”.

2Turn AMS to select “Setup 13”, then press AMS.

3Turn AMS to adjust the analog output level.

4Press AMS.

5Press MENU/NO.

To return to the initial setting (0.0dB)

Press CLEAR.

Notes

•The analog signal level for output to the headphones connected through the PHONES jack is also changed.

•When you eject the MD or turn off the power by pressing the 1/uswitch, the output level is reset to the initial setting (0.0dB).

25EN