Playing MDs

b)When using the remote

Press the number buttons to enter the tracks you want to program in the order you want. To program a track with a number over 25, use the >25 button (see page 20).

If you enter the wrong track number

Press 0or )until the wrong track number flashes, then enter the correct track number

with the number buttons. If “0” flashes, press 0.

4Repeat Step 3 to enter other tracks.

The entered track is added to the location where the “0” flashes.

Each time you enter a track, the total program time is added up and appears in the display.

5After finishing programming, press YES. “Complete!!” appears and programming is completed.

6Press PLAY MODE repeatedly (or PROGRAM once) until “PROGRAM” appears in the display.

7Press ·to start Program Play.

To cancel Program Play

Press PLAY MODE repeatedly (or CONTINUE once) when the deck is stopped until “PROGRAM” disappears.

zThe program remains even after Program Play ends

When you press ·, you can play the same program again.

Notes

•The display shows “- -m - -s” instead of the total playing time when the total playing time of the program exceeds 199 minutes.

•“ProgramFull” appears when you program over 25 tracks. Erase the unnecessary tracks to enter other tracks.

Checking the track order

While the deck is stopped and “PROGRAM” is on, press LEVEL/DISPLAY/CHAR (or DISPLAY) several times.

The track numbers appear in the order they were programmed as follow:

“/3 /5 /8 /1 /2/”

To check the rest of the track order

Turn AMS.

You can scroll the display to check all the track numbers you programmed.

Changing the track order

You can change the order of the tracks in your program before you start playing.

To

 

Do the following procedure

 

 

after Steps 1 and 2 in

 

 

“Creating Your Own

 

 

Program”:

 

 

 

Erase

a track

Press 0or ) until the track

 

 

number you want to erase

 

 

flashes, then press CLEAR.

 

 

 

 

the whole

Keep pressing CLEAR until all

 

program

programmed track numbers

 

 

disappear.

 

 

 

 

Add a

to the

1

Press 0until “0” flashes at

track

beginning of

 

the left of the first track.

 

the program

2

Do Steps 3 to 5 on pages 23

 

 

 

and 24.

 

 

 

 

 

in the middle

1

Press 0or ) until the

 

of the program

 

track which precedes the track

 

 

2

to be added flashes.

 

 

Press AMS so that “0” flashes,

 

 

 

then do Steps 3 to 5 on pages

 

 

 

23 and 24.

 

 

 

 

 

to the end of

1

Press 0until “0” flashes at

 

the program

2

the right of the last track.

 

 

Do Steps 3 to 5 on pages 23

 

 

 

and 24.

 

 

 

Change a track in the

1

Press 0or ) until the

program

 

 

track number you want to

 

 

2

change flashes.

 

 

Do Steps 3 to 5 on pages 23

 

 

 

and 24.

 

 

 

 

24EN