Lincoln Electric IM700-D manual Bore x Stroke, Duty Cycle Welding Output Volts at Rated Amps

A-1		INSTALLATION			A-1
TECHNICAL SPECIFICATIONS - Commander 300
		INPUT - DIESEL ENGINE
Make/Model	Displacement	Description	Speed (RPM)	Starting	Capacities
Diesel Engine				System
	125 cu. in
Deutz	(2.05 L)	3 cylinder
F3L 1011F	Bore x Stroke	31 HP(23 kw)
(Codes 11199	3.89” x 4.13”	@ 1800 RPM			Fuel: 25 gal.
and Below)	(99mm x 105mm)				94.6 L
			High Idle 1900	12 VDC battery
			Low Idle 1475	& Starter
Deutz	142 cu. in		Full Load 1800		Oil: 6.3 Qts.
F3L2011	(2.33L)	3 cylinder			6.0 L
(Codes 11200	Bore x Stroke	32 HP(24 kw)
and above)	3.70” x 4.41”	@ 1800 RPM
	(94mm x 112mm)

RATED OUTPUT - WELDER

Duty Cycle			Welding Output			Volts at Rated Amps
100%		300 amps (DC multi-purpose)					32 volts
60%		375 amps (DC multi-purpose)					34 volts
	OUTPUT - WELDER AND GENERATOR
Welding Range		Open Circuit Voltage			Auxiliary Power1
30-300 Amps CC / CV TIG			80 Max OCV			120/240 VAC
						10,000 Watts, 60 Hz.
			@1900 RPM			100% Duty Cycle
		PHYSICAL DIMENSIONS
HEIGHT2	WIDTH			DEPTH			WEIGHT
							1325 lbs.(601 kg)
							(Codes 11199 and
							below)
40.0 in.	31.5 in.			63.1 in.			1327 lbs.(602 kg)
							(Code 11200)
1016.0 mm	800.1 mm			1602.7 mm
							1332 lbs.(604 kg)
							(Code 11201)

1.Output rating in watts is equivalent to volt-amperes at unity power factor.

Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

2.Top of Enclosure. Add 8.6” (218.4mm) for exhaust.

COMMANDER 300