Adjusting the Brightness of the Display Z
You can select one of four brightness levels for the display window. The A, HX, or xbuttons on the deck turn off when a low brightness level is selected.
?/1
1 2 3
4 5 6
7 8 9 +
>10 10 | – |
| /0 |
N X x z
./>
. > m M
MENU/NO
YES
1While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2Press ./> repeatedly until “Dimmer 1” appears, then press YES.
3Press ./> repeatedly to select the setting, then press YES.
When you select | The display window becomes |
|
|
Dimmer 1 (factory setting) | Fully lit and the A, HX, or x |
| buttons are on. |
|
|
Dimmer 2 | Dimmer and the A, HX, or x |
| buttons are on. |
|
|
Dimmer 3 | Dimmer and the A, HX, or x |
| buttons are off. |
|
|
Dimmer 4 | Turned off and the A, HX, or x |
| buttons are off. |
|
|
4Press MENU/NO.
zIf any change occurs in the display information while the display window is turned off
The display turns back on (dimly) for several seconds to show the new information, and then turns off again.
zThe brightness level of the display window on the MD deck can be linked to that of the receiver’s display window
When the i.LINK Control function is activated on the receiver, the brightness level of the display window on the MD deck is forcibly linked to that of the receiver’s display window regardless of the setting on the MD deck.
Other Settings Using the Setup Menu Z
?/1
1 2 3
4 5 6
7 8 9 +
>10 10 | – |
| /0 |
N X x z
./>
. > m M
MENU/NO
YES
Verifying the current programme source
to be recorded (Ping function)
You can verify which of the components is currently selected as a programme source to be recorded from by pressing the INPUT button. When this function is turned on, “N N n n” will appear momentarily on the display window of the selected programme source each time the INPUT button is pressed. Note that this function works on the
1While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2Press ./> repeatedly until “Ping On” appears, then press YES.
3Press ./> repeatedly to select the setting, then press YES.
To | Select |
Turn on the Ping function | Ping On (factory setting) |
|
|
Turn off the Ping function | Ping Off |
4Press MENU/NO.
Functions Other