Playing a Specific Track
While the deck is playing or stopped, use the procedure below to quickly play any track.
Locating a Particular Point in a Track Z
You can locate a particular point in a track during play or play pause.
?/1
HX
?/1
1 2 3
1 | 2 | 3 | Number | |
4 | 5 | 6 | ||
buttons | ||||
|
|
|
A | x | 7 8 9 | + |
|
|
.>
z | >10 | >10 | 10 | /0 |
|
| – | ||
| N | N | X | x z |
. > m M | ./> |
./>
4 5 6
7 8 9 +
>10 10 | – |
| /0 |
N X x z
. > m M m/M
MDs Playing
Locating a track with AMS*
To go to | Press |
The next or a succeeding track | > repeatedly. |
during play |
|
|
|
A preceding track during play | . repeatedly. |
|
|
The beginning of the current | . once. |
track during play |
|
|
|
A specific track while the deck | ./> repeatedly until the |
is stopped | track number you want to go to |
| flashes in the display, then press |
| HX (or N). |
|
|
*Automatic Music Sensor
zTo locate the last track of the MD quickly
While the deck is stopped, press . once.
zIf you locate a track while the deck is stopped or paused
The deck will still be stopped or paused at the beginning of the located track.
Playing a track by entering the track
number Z
Press the number button(s) to enter the track number of the track you want to play.
To enter a track number over 10
1Press >10.
2Enter the corresponding digits.
To enter 0, press 10 instead.
Examples:
•To play track number 30, press >10, then 3 and 10.
•To play track number 108, press >10 twice, then 1, 10, and 8.
zIf you enter a track number while the deck is stopped or paused
The deck will still be stopped or paused at the beginning of the track.
Locating a point while monitoring the
sound
Press down m/M during play.
You will hear intermittent playback as the disc goes forward or in reverse. When you reach the point, release the button.
Notes
•If the disc reaches the end while you’re pressing M, the deck stops.
•Tracks that are only a few seconds long may be too short for monitoring. For such tracks, play the MD at normal speed.
Locating a point by observing the time
indication
Press down m/M during play pause.
The elapsed playing time of the track appears in the display. When you reach the point, release the button. No sound is output during this time.
zWhen “- Over
The disc has reached the end while you’re pressing down M. Press m to go back.