Beep Output During
Operations
Your deck can output various beeps to allow you to verify deck operations by sound.
The beeps are output from both the deck itself and the headphones.
Rear of the deck
| LINE | DIGITAL | BEEP |
(ANALOG) |
|
| |
IN | OUT |
|
|
| IN | OUT |
|
| L |
| ON OFF |
| R |
|
|
BEEP
Switch BEEP to ON.
A high- or
Additional Information
Operation | Beep sound |
|
|
The deck has been turned on. | One short beep (high) |
|
|
The deck has been turned off. | Two short beeps (high) |
|
|
An operation button was pressed | Three short beeps |
with no MD loaded. | (high), followed by one |
| continuous beep (high) |
rwas pressed but the MD is full. One continuous beep (high)
r was pressed and the deck has | Consecutive beeps (low) | ||
changed to recording pause. | are emitted, one for each | ||
|
| 10 minutes of remaining | |
|
| time on the MD*, | |
|
| followed by single beeps | |
|
| every few seconds. | |
|
|
|
|
| ß (áor P) was pressed and | One short beep (high) | |
| the deck has started recording. |
|
|
|
|
|
|
| The deck is recording or in | One continuous beep | |
| recording pause and the peak | (low) | |
| level meter level has exceeded the |
|
|
| recommended level** |
|
|
| (“OVER” lights up). |
|
|
|
|
|
|
| The deck is recording and the | Several short beeps | |
| remaining time on the MD has | (high) | |
| dropped below 3 minutes**. |
|
|
|
|
| |
ß(áor P) was pressed and | One short beep (high) | ||
the deck has started playing. |
|
| |
|
|
| |
| p was pressed. | One short beep (low) | |
|
|
| |
| PLAY MODE was pressed while | One short beep (low) | |
| the deck is stopped, and |
|
|
| continuous (normal) play mode |
|
|
| has been selected (canceling |
|
|
| Shuffle or Program Play mode). |
|
|
|
|
| |
EDIT/NO was pressed while the | One short beep (high) | ||
deck is stopped, and “All Erase ?” |
|
| |
has appeared in the display. |
|
| |
|
|
| |
EDIT/NO was pressed while the | One short beep (high) | ||
deck is recording, and |
|
| |
“LevelSync ?” has appeared in the |
|
| |
display **. |
|
| |
|
|
|
|
| EDIT/NO was pressed while the | One short beep (high) | |
| deck is playing, and “Erase ?” has |
|
|
| appeared in the display. |
|
|
|
|
|
|
*One beep for each 10 minutes of remaining time (e.g., one beep for 10 to 20 minutes, two beeps for 20 to 30 minutes, and three beeps for 30 to 40 minutes). No beep is output for a remaining time of 10 minutes or less.
**This beep is output only through the headphones; no beep is output from the deck.
31
