Sony MDS-S37 Erasing Recordings Erase Function, Pausing after each track Auto Pause

EditPlaying RecordedMDs MDs Editing Recorded MDs

Useful Tips When Recording From MDs to Tape

The Auto Space and Auto Pause Functions described in this section make recording from MDs to tape more easy.

6

A.SPACE

áP p

Inserting blank spaces while recording to tape (Auto Space)

The Auto Space Function inserts a 3-second blank space between each track while recording from MDs to tapes, allowing you to use the AMS function during later playback.

Press A.SPACE repeatedly until “A.SPACE” appears in the display.

To cancel Auto Space

Press A.SPACE repeatedly until “A.SPACE” disappears.

Note

If the Auto Space Function is on while recording a selection containing multiple track numbers, (for example, a medley or symphony), blank spaces will be inserted within the selection whenever the track number changes.

Pausing after each track (Auto Pause)

When the Auto Pause Function is on, the deck pauses after playing each track. Auto Pause is convenient when recording single tracks or multiple, non- consecutive tracks.

Press A.SPACE repeatedly until “A.PAUSE” appears in the display.

To restart playback

Press ß( á or P).

To cancel Auto Pause

Press A.SPACE repeatedly until “A.PAUSE” disappears.

Note

Notes on Editing

You can edit the recorded tracks after recording, using the following functions:

•Erase Function allows you to erase recorded tracks simply by specifying the corresponding track number.

•Divide Function allows you to divide tracks at specified points so that you can quickly locate those points afterwards, using the AMS function.

•Combine Function allows you to combine two consecutive tracks into one.

•Move Function allows you to change the order of tracks by moving a specific track to a track position you want.

•Title Function allows you to create titles for your recorded MDs and tracks.

If “Protected” appears in the display

The deck could not edit because the record-protect slot on the MD is open. Edit after closing the slot.

When “TOC” flashes in the display

Do not move the deck or pull out the AC power cord. After editing, “TOC” lights continuously until you eject the MD or turn off the power. “TOC” flashes while the deck is updating the TOC. When the deck finishes updating the TOC, “TOC”goes off.

Erasing Recordings

(Erase Function)

Do the procedures below to erase following:

•A single track

•All tracks

•Parts of a track

Note, however, that once erased, MD data cannot be recovered.

- AMS ± EDIT/NO			YES
¤	0 ) Ḡp	r
			• •
			• •
		•	•	•
		•		•
		•		•
		•		•
		•		•

	If you turn off the deck or disconnect the AC power cord, the
	deck will recall the last setting of the Auto Space and Auto
20	Pause Functions the next time you turn on the deck.