Other operations

Rotate the VOL control to

adjust the volume.

Press (ATT) to attenuate the sound.

OFF

Press (OFF) to turn off the unit.

Press (SOUND) to adjust the volume and sound menu.

Press (LIST) to:

•Display the memorised names.

•Display the programme type.

Changing the operative direction

The operative direction of controls is factory- set as in the illustration below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Press (SOUND) for two seconds while pushing the VOL control.

Tip

You can also change the operative direction of these controls with the unit (page 18).

Adjusting the sound characteristics

You can adjust the bass, treble, balance and fader.

Each source can store the bass and treble levels respectively.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nBAS (bass) n

TRE (treble) nBAL (left-right) n

FAD (front-rear)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting the item. (After three seconds, the dial functions reverts to the volume control.)

Attenuating the sound

Press (ATT) on the optional rotary commander.

“ATT on” flashes momentarily.

To restore the previous volume level, press (ATT) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone-ATT function).

17