Changing the sound and display settings
You can set: •Clock (page 7).
•CT (Clock Time) (page 15).
•D.Info (Dual Information) — to display the clock and the play mode at the same time (on) or to display the information alternately (off).
•Dimmer — to change the brightness of the display.
—Select “Auto” to dim the display only when you turn the lights on.
—Select “on” to dim the display.
—Select “off” to deactivate Dimmer. •Contrast — to adjust the contrast if the
indications in the display are not recognizable because of the unit's installed position.
•Beep — to turn on or off the beeps.
•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.
—Select “norm” to use the rotary commander in the
—Select “rev” when you mount the rotary commander on the right side of the steering column.
•M.dspl (Motion display) — to turn the motion display 1, 2, or off.
•A.Scrl (Auto Scroll) (page 8, 19).
1
2 Press (2) (SET UP) repeatedly until the desired item appears.Each time you press (2) (SET UP), the item changes as follows:
Clock nCT nD.Info* nDimmer nContrast
nBeep nRM nM.dspl n A.Scrl*
*When no MD or CD is playing, this item will not appear.
Note
The displayed item will differ depending on the source.
3 Press (4) (n) to select the desired setting (Example: on or off).
For the “Contrast” setting, pressing (4) (n) makes the contrast higher, and pressing (1) (N) makes the contrast lower.
4 Press (SHIFT).
After the mode setting is complete, the display returns to normal playback mode.
Boosting the bass sound
— D.bass
You can enjoy a clear and powerful bass sound. The
You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the
Level | |
| |
|
0dB
Frequency (Hz)
Adjusting the bass curveTurn theTo cancel, turn the dial to the OFF position.
Note
If the bass sound becomes distorted, adjust the D- bass control or volume.
18